Precision, non-contact, measurement and control solutions

LaserLinc, Inc.: precision, non-contact, measurement and control solutions for wire, cable, hose, tube, pipe, and other products in medical, automotive, aerospace, energy, metrology and other industries

+1 937.318.2440      info@laserlinc.com

Home > Products > Laser Micrometers > Triple-Axis Scanning Laser Micrometers > Triton312 Specifications and Drawings

Triton312™ Specifications and Drawings


Triton312 Drawings

IGES (.igs) - 6.47mb

JPEG (.jpg) - 636kb

STEP (.step) - 3.05mb

Overall Mounting Dimensions (.pdf) - 144kb

Executable SolidWorks® e-drawing: Executable (.exe) - 6.24mb


Highlights

  • Accurate ovality measurement
    regardless of orientation
  • Most precise average diameter
  • Measure any material, even clear
  • Mount in any orientation
  • Use online or for benchtop
    applications
  • Works with the Total Vu™ HMI
  • Available with Ethernet-based
    NetLinc™ signal interface
  • Use with a SmartLinc™ processor
    for an intelligent interface via
    industrial communication protocols
  • Four-Year Warranty!
Measurement Range
.004˝ – .45˝ [.102mm – 11.4mm]
Axes of measurement
Gate Size
.47˝ [12mm]
Measurements per second1
1800 [600 per axis]
Resolution
.000001˝ [.025µm]
Repeatability2
Single Scan
±.0001˝ [±.2.5µm]
Two Second
±.000005˝ [±.125µm]
Positional Error3
±.0001˝ [±2.5µm]
Approx. Dimensions
[H x W x D]
9.75˝ x 10˝ x 1.25˝ / 248mm x 254mm x 32mm
Light Source
Visible red laser diode, Laser Class II, 675nm wavelength [nominal], < 1.0 mW
Approx. Weight
8.5lbs [3.9kg]
Power requirements
+12VDC 125mA, +5VDC 75mA, –5VDC 50mA
Provided by host PC or external NetLinc
Cabling
Standard lengths: 5, 10, 25, 50 , 75, and 100 feet [1.5, 3, 7.6, 15.2, 22.9, and 30.5 m]
Custom lengths, connectors, cable construction, etc., quoted on request
Gauge Interface Options
Warranty
Four years, parts and labor. Read more here

1Measurement rate is the number of times per second each measurement field (or axis) is scanned (shown in square brackets). The value specified is the aggregate measurement rate for all axes.

2Repeatability applies to parts 0.4" [10.2mm] and under.

3Positional error applies to center 0.4" [10.2mm].

®SolidWorks is a registered trademark of Dassault Systèmes SOLIDWORKS Corp.