Examples

Single-axis, height—measure the height of a part.  In the top-most image, a part of a known height, H, is used to calibrate the system.  In the other images, the height, h, of a bottle is calculated based on the difference between the edge position that was saved for the known part (represented by the dashed line) and the edge position established by the top of the bottle.  The parts measured can be shorter or taller than the reference part.

To view other measurements, click on the selections on the left.

These measurement methods can be performed using Total Vu™ software and any of the micrometers that LaserLinc supports.