Precision, non-contact, measurement and control solutions

LaserLinc, Inc.: precision, non-contact, measurement and control solutions for wire, cable, hose, tube, pipe, and other products in medical, automotive, aerospace, energy, metrology and other industries

+1 937.318.2440

Home > Products > Laser Micrometers > Single-Axis Scanning Laser Micrometers > TLAser160s Specifications and Drawings

TLAser160s™ Specifications and Drawings

Measurement Range
0.010˝ – 2.3˝ [.254mm – 58mm]
Axes of measurement
Gate Size
2.36" [60mm]
Measurements per second1
4000 (optional)
.000001˝ [.025µm]
Single Scan
±.0010˝ [±25µm]
Two Second
±.00002˝ [±.5µm]
Positional Error3
±.0002˝ [±5µm]
Approx. Dimensions
[H x W x D]
Transmitter - 7.5˝ x 8.5˝ x 2˝ [191mm x 216mm x 51mm]
Receiver - 7.5˝ x 4˝ x 2˝ [191mm x 102mm x 51mm]
Light Source
Visible red laser diode, Laser Class II, 675nm wavelength [nominal], < 1.0 mW
Approx. Weight
16 lbs [7.25kg]
Power requirements
100-240 VAC 50/60 Hz 50 W max.
Standard lengths: 5, 10, 25, 50 , 75, and 100 feet [1.5, 3, 7.6, 15.2, 22.9, and 30.5 m]
Custom lengths, connectors, cable construction, etc., quoted on request
Gauge Interface Options
Four years, parts and labor. Read more here

1Measurement rate is the number of times per second the measurement field is scanned.

2Repeatability applies to parts 2.0" [51mm] and under.

3Positional error applies to center 2.0" [51mm].

®SolidWorks is a registered trademark of Dassault Systèmes SOLIDWORKS Corp.