Precision, non-contact, measurement and control solutions

LaserLinc, Inc.: precision, non-contact, measurement and control solutions for wire, cable, hose, tube, pipe, and other products in medical, automotive, aerospace, energy, metrology and other industries

+1 937.318.2440

Home > Products > Laser Micrometers > Triple-Axis Scanning Laser Micrometers > Triton330 Specifications and Drawings

Triton330™ Specifications and Drawings

Triton330 Drawings

IGES (.igs) - 6.47mb

JPEG (.jpg) - 636kb

STEP (.step) - 3.05mb

Overall Mounting Dimensions (.pdf) - 144kb

Executable SolidWorks® e-drawing: Executable (.exe) - 6.24mb


  • Accurate ovality measurement
    regardless of orientation
  • Most precise average diameter
  • Measure any material, even clear
  • Mount in any orientation
  • Use online or for benchtop
  • Works with the Total Vu™ HMI
  • Available with Ethernet-based
    NetLinc™ signal interface
  • Use with a SmartLinc™ processor
    for an intelligent interface via
    industrial communication protocols
  • Four-Year Warranty!
Measurement Range
.004˝ – 1.15˝ [.102mm – 29.2mm]
Axes of measurement
Gate Size
1.18˝ [30mm]
Measurements per second1
900 [300 per axis]
.000001˝ [.025µm]
Single Scan
±.0001˝ [±2.5µm]
Two Second
±.000005˝ [±.125µm]
Positional Error3
±.0001˝ [±2.5µm]
Approx. Dimensions
[H x W x D]
9.75˝ x 10˝ x 1.25˝ / 248mm x 254mm x 32mm
Light Source
Visible red laser diode, Laser Class II, 675nm wavelength [nominal], < 1.0 mW
Approx. Weight
8.5lbs [3.9kg]
Power requirements
+12VDC 125mA, +5VDC 75mA, –5VDC 50mA
Provided by host PC or external NetLinc
Standard lengths: 5, 10, 25, 50 , 75, and 100 feet [1.5, 3, 7.6, 15.2, 22.9, and 30.5 m]
Custom lengths, connectors, cable construction, etc., quoted on request
Gauge Interface Options
Four years, parts and labor. Read more here

1Measurement rate is the number of times per second each measurement field (or axis) is scanned (shown in square brackets). The value specified is the aggregate measurement rate for all axes.

2Repeatability applies to parts 1.0" [25.4mm] and under.

3Positional error applies to center 1.0" [25.4mm].

®SolidWorks is a registered trademark of Dassault Systèmes SOLIDWORKS Corp.